Hybrid/Utility

The rectangular shape helps provide unbelievable performance on a design to replace harder-to-hit long irons. Weight is redistributed to the two rear corners to provide increased stability by raising the moment of inertia about the center of gravity. The unpainted portion along front of the crown is an added alignment feature to complement the rectangular profile and slight offset hosel to assist in squaring the face toward the target. Precision cast from 17-4 stainless steel and created with a special glider sole to reduce turf drag in addition to fat shots.

The Acer XK hybrids are based on the most popular hybrid platform in our line, but we added a few new design elements to further improve upon the performance. First, we incorporated a variable face thickness to reduce the perimeter area of the impact area so the entire club face could be more active. This acts to increase the area of forgiveness over a larger portion of the face. Secondly, the crowns were constructed with our exclusive VCT (variable crown technology) that measure as little as 0.5mm thick. All the unwanted weight normally reserved for the crown was repositioned deep within the head for added stability, feel and added trajectory to hold greens better. Length and lofts were selected to be exact replacements for the same numbered long irons in terms of yardage.

Seemingly transitioned hybrids allow a choice between the fairways and easier-to-hit higher launching irons. These can be mixed and matched to provide the ideal set make up. An incredible high percentage of weight is concentrated very low to launch the ball with ease and provide an ultra-solid feel.

Part hollow-bodied iron, part hybrid, the Dynacraft Avatar XMOI is our first hybrid set to take on a truly progressive appearance throughout the set. The #3 and 4 irons have a wider footprint sporting an increased breadth and shallow face. This positions the center of gravity much lower and more rearward within the design to give less skilled players added confidence and the ability to easily get the ball airborne and also increase solidness of contact. The mid-irons progressively become narrower (as less game improvement is required) and bridge the gap between a conventional iron appearance. The scoring clubs starting with the #8 look traditional at address. The additional loft beautifully hides the hollow-body but still helps to increase the moment of inertia. The rounded toplines provide plenty of face area and raise the center of gravity enough to control the trajectory. The inclusion of three wedges provide for better course management by eliminating distance gaps.

The innovative hybrid shape of the hot Power Play Select 5000 Hybrid Iron is designed to be as easy to hit as your fairway woods, but with the accuracy you need in irons. The unique smooth sole design reduces the chance of digging into the ground and lowers the center of gravity to ensure that the ball gets out and gets airborne fast. Full sets are available for both right and left handed golfers. Heads are painted a Metallic Charcoal.

The largest hybrids in the line complements the Mantara family with its distinctive look. Utilizing the same concept as the Mantara family, the square profile moves the center of gravity rearward and creates a higher MOI. Designed to replace traditional #3, 4 and 5-irons, these are large volume clubs for maximum forgiveness on off-center shots. The Mantara hybrids will set up much like a fairway wood with the face forward feature and will have a very neutral or straight ball flight, rather than many draw biased designs offered today. Conforms with USGA Rules.

The Acer XP905 Hybrids sport a unique beveled-cut sole design which helps to redistribute weight for optimal launch. The sole design also provides precision accuracy as the weight is moved further back from the face. Conforms with USGA Rules.

Power Play has extended the interchangeable weighting technology to hybrids. The new tri-port weighting system not only allows for a lower, deeper center-of-gravity and increased MOI, but the three interchangeable weighted screws may be configured to encourage straight, draw, or fade trajectory. Now available through SW to replace your entire set of irons. Conforms with USGA Rules.

The Acer XDS 'Wide Sole' Hybrid design is based on fairway wood parameters that allow for the super high launch characteristics that make these hybrids easy to play. This set gradually decreases the volume or size of the head as the loft is increased and less help is usually needed. The rearward center-of-gravity of this hybrid design is enhanced by the rails at the soleplate to help you power through the grass and prevent 'digging' at impact for better quality contact with the ball. With its leading edge designed well forward of the hosel, you will be able to create more lift and produce higher launch angle thus more distance! Engineered for standard iron lengths, the Acer 'Wide Sole' Hybrid also provides you with additional control and accuracy. Conforms with USGA Rules.

The Power Play Caiman hybrid is a high-performance option to replace those long, hard-to-hit irons in the bag with some of the latest technological know-how. The pull-face construction utilizes an active maraging face insert.